|
 |
1 to 10 of 11 Neon Accessories
|
Glass Tube Support 1 3/4'' Alum. Base w/ tie wire
Height: 1 ¾''
Glass stand-off with aluminum base and attached tie wires
Use for mounting neon tubing to sign back or enclosure
Simple and easy to use
Other styles and sizes available
Sold in bags of 10
SKU: gts13/4
Weight: 3
|
|
|
|
|
|
|
Neon GTO Wiggle Wire with integral sleeve by Page Tuf-Hide
15,000 VAC, 105 degrees C
Meets construction requirements of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99
Meets the integral sleeve requirement of Underwriter's Laboratories Inc.® Standard UL 814 effective 8/1/99
UL listed to replace regular GTO and separate sleeve combina
...More
SKU: HFSGTO
Weight: 3
|
|
|
|
|
|
|
Wide End Cap (Electrode Cover) 15 mm
Use to insulate double back connections between electrodes and GTO
Great for portable signs
Non-breakable
Fits 15 mm tubing
Listed to applicable US and Canadian standards and requirements by Underwriters Laboratories, Inc.® for dry and damp locations
Sold In bags of 10
SKU: wec15mm
Weight: 3
|
|
|
|
|
|
|
Wide short Sleeves 15mm
Use to insulate straight aligned connections between electrodes and GTO cable
Great for portable signs
Non-breakable
Fits 15 mm tubing
Listed to applicable US and Canadian standards and requirements by Underwriters Laboratories, Inc.® for dry and damp locations
Sold In bags of 10
SKU: wss15
Weight: 3
|
|
|
|
|
|
|
Federal Bushings, 1/2 Porcelain
Federal Bushing, 1/2'' Porcelain
Use to pass GTO cable through raceway barriers. Made from electrical grade porcelain glazed ceramic, ½'' conduit threads with locknut, Pre-assembled
Thread depth: 11/16'' (8 threads)
Packaging: 10 per box
SKU: fb
Weight: 3
|
|
|
|
|
|
|
High Voltage Neon GTO Splice Connectors
High Voltage Connector insulates splice between two GTO cables. When routed through listed sign enclosures, GTO cables should be covered with GtoSleeving® or GtoCovering®. When routed outside listed sign enclosures, GTO cables should be covered with GtoSleeving® and routed through flexible or rigid
...More
SKU: HVNSC
Weight: 4
|
|
|
|
|
|
|
Pk Housing
PK 1/2'' Hex (Female) Fitting w/ Flange. PK Housings provide the best way to penetrate walls for electrode connections Integral mounting flange provides a bonding means for the metal backed sign body without requiring a separate bonding conductor. 2 3/8'' OD Flange provides very secure mounting with
...More
SKU: PK
Weight: 4
|
|
|
|
|
|
|
Toggle Switch 20 amp.
Toggle Switch, 20 Amp, 120-277 VAC, 1 ½ HP. 6'' lead wires. Internal Toggle Seal. Silicone Boot. On-Off Faceplate. ½'' Panel Opening. Pre-assembled. Recognized to US and Canadian requirements
Packaging: 2 per box
SKU: ts
Weight: 3
|
|
|
|
|
|
|
Top & Side-Off Transformer Can
Top & Side-Off Transformer Can – 24''x7''x8''
UL Listed for protected (damp) locations
Strong and rigid; made of G90 galvanized steel sheet .029 inch thick. Convenient ½'' conduit knockouts – 6 on each end, Knockouts for toggle switch – 2 on each end. Multiple louvers on each end to maximize vent
...More
SKU: transcan
Weight: 5
|
|
|
|
|
|
|
Glass Housing Small
Affordable and safe method for making neon electrode connections in raceways
Suitable for indoor, outdoor protected, and outdoor exposed (wet) locations
Borosilicate heat resistant glass
Spring contact allows for easy neon tube servicing
Rated for 7500 volt applications, including 15,000 V m
...More
SKU: GH200
Weight: 4
|
|
|
|
|
|
|
